I would like to sell this as a group $60 includes shipping in the US
2 size B Looms 14.5 x 18.5
1 size A Loom 12 x 16
1 peg loom 7 x 10
2 wonder wands
some shuttles
and a bag of left over Harrisville yarn
↧
FS: Lot of Harrisville Lap Looms
↧
ISO: Treadle stand for a 22” Leclerc Medico table loom
Just looking for a stand. If you have one pining away unused and unloved, I’ll be glad to give it a good home and plenty of exercise!
↧
↧
FS: Harrisville Easy Weaver B
For sale: used and improved Harrisville Easy Weaver B loom (15” weaving width) with 8 dent reed and instructions. NO SHUTTLES. $50 plus shipping from Atlanta, Georgia area. PayPal only. Shipping weight approx. 8 lbs (3.75kg); shipping dimensions 24”x6”x19”. It’s considered oversized for USPS shipping thus will cost $30+. I have access to other shipping options that will be less.
I bought it used with the original warp still on it; used it twice; got a 15” Cricket to replace it. Improved by installing fabric aprons over the original Velcro on the apron bars (really? Velcro+yarn?). Lots of ideas for other improvements in the Warped Weavers group.
Photos show the loom assembled and as disassembled for shipping. It will take 5 minutes and a phillips head screwdriver (not included) to put it back together. I labeled the parts and where they go. 
↧
ISO Glimakra vertical countermarche
I am looking for a vertical countermarche unit, preferably with jacks for 8-10 shafts, for a 120cm Glimakra Standard. I currently have a 10-shaft horizontal countermarche unit which would be available to swap as a part of the purchase. Anyone have one they would like to sell or swap?
↧
FS: Weaver's Craft
Weaver’s Craft Issue - Dec 2000 / Jan 2001 - $3.50
Weaver’s Craft Issue 23 - $3.50
Please include your zip code (for a postal quote) and your paypal email address (so I can send you a money request) when inquiring.
Prices do not includes shipping - US Shipping only
↧
↧
FS: Previously Viewed DVD
FS: Previously Veiwed DVD - Totally Twill the Basics by Robyn Spady $12, plus shipping
↧
FS: 4H Structo Artcraft Loom
For sale - Structo Artcraft 4 harness, metal table loom. Weaving width 8 inches, 15 dent reed. Approx 240 flat metal heddles. Reed and heddles in good shape, frame has some cosmetic issues - at some point there was a lot of masking tape on it, no idea why - but is structurally sound. $75 plus shipping from 85338.
ETA: X-posted to Structo Looms group
↧
ISO: 24" reed 20 dent
Just wondering if anyone has a 22” or 24” SS reed with 20 dents that they would be willing to sell? Please pm me. I’m definitely willing to pay I’m just hoping to find one for less than $100 inc shipping since my new to me Norwood loom was only $175. Thanks!
↧
FS: Cone Holder/Yarn Feeder
This hand-crafted stand sits on the floor or on a table. Up to 8 cones of yarn can be held with the yarn fed up through 8 thread guides. Brass pins hold the top and bottom so the holder can be disassembled for easy storage. Made of ash and/or birch, it is 20” long by 8” wide by 16” tall.
$88.00 which includes shipping & handling. PayPal preferred.
↧
↧
FS: Reed and Lease Stick Holder
Holds the reed in position for sleying and keeps a hold on the lease sticks as well. They are 12” long by 2.5” wide by 1” (standard 1”x3” board)
$45.00 including shipping & handling. PayPal preferred.
↧
FS: 24" 8H Ashford Table Loom + Stand
FS: 8 Harness Ashford Table Loom with 24” weaving width and treadle stand for 4 harness direct tie-up
Also included:
- Ashford threading hook and sleying hook
- 1000+ Texsolv heddles (over 40 EPI)
- barely used Glimakra 12.5” low-profile damask shuttle
- barely used Schacht 9” maple shuttle
- 3 paper pirns
- lease sticks
- Ashford raddle
- Ashford wrenches and hex key
- complete manuals for loom and stand
- cardboard warp strips and heavy brown paper for winding at least 6yd warp
- used copy of “A Weaver’s Book of 8-Shaft Patterns from the Friends of Handwoven” edited by Carol Strickler
- used copy of “The Best of Weaver’s: Twill Thrills”
Loom has repaired cracks in the top of the castle and in one treadle bar holder. Neither flaw affects weaving, but has been priced to reflect them.
I’ve also replaced the elastics on the beater as the originals were dried out and wouldn’t last much longer.
The loom can be set up to be used with the treadles as a 4 harness floor loom or as an 8 harness loom to be used with the levers.
It folds up for easy storage and portability, it easily fits in a VW beetle even without folding the loom.
Selling because I bought this loom used 6 months ago, and it has turned out to just not be the loom for me.
Asking $600 Loom is located just west of Asheville, NC. Pickup is preferred, though I am willing to drive a couple of hours to deliver.
↧
FS: Yarn Tree
This is a beautiful tool for the weaving room but
my weaving room is also a room we use to
enter the house so my space is limited.
Positioning all three floor looms so that they
won’t be neglected means giving up something
and it was this yarn tree.
$150.
Cash.
Pick-up/no shipping.
Located in Massachusetts.
Details on the project page:
http://www.ravelry.com/projects/jeen/yarn-tree
Please respond with private message or the moderator
must remove your response and I may not see your
response on the forum.
↧
FSOT: small Toika temples - orange
Item 3520 in Toika products
20 - 27 cm | 7 7/8 - 10 5/8”
Hi weavers. For local (Northampton Massachusetts USA) FSOT or to ship FS+postage, a pair of small orange tapestry temples in mint condition by Toika (marked).
Just got these in a bigger lot of spinning and weaving stuff and did the research. More pics available on request.
Not sure what’s fair but will start by setting at $30 plus exact or less than USPS shipping. I got a bargain and would like to give one.
They do NOT have the little rectangular clip but my sense is it is not essential. Even Toika doesn’t list it as a replacement part!
Hope I adhered to all rules. Happy weaving.
↧
↧
FS: 36" Leclerc Artisat 4H 6T Loom & Bench - NH
For Sale: 36” Leclerc Artisat 4H 6T floor loom with Leclerc bench. Very good condition with minor scuffs & marks. Works great! Folds up for easy storage & transporting. Comes with Leclerc bench which has top that opens for storage. Includes 12 dpi reed. Price for loom & bench is $475. Located in North Haverhill, NH but some delivery is available. Any questions please ask!
↧
FS: Schacht Inkle Loom
For Sale: Schacht Inkle Loom with instructions. In perfect condition. Sells new for $99. Asking $50 plus shipping. Please PM with your zip code for shipping estimate.
↧
ISO: Gilmore Big Wave loom
I’m a fan of the small Gilmore looms and am thinking of adding a Big Wave. If you have one that isn’t getting the love it deserves, let me know. I may be able to give it a new home in Maine.
↧
Hand painted warp For sale
I have two 8/2 slub tencel/rayon warps in the colorway Rare Earth for sale
400 ends and 7.5 yards, asking $150 plus shipping and one same colorway but 200 ends and 7.5 yards for $80 plus shipping.
Warps have two crosses on each end, one threading cross and one raddle cross with ten ends in each group.
Thank you for looking :)
↧
↧
FS: Weaver's Craft
Weaver’s Craft Issue - Dec 2000 / Jan 2001 - $3.50
Weaver’s Craft Issue 23 - $3.50
Please include your zip code (for a postal quote) and your paypal email address (so I can send you a money request) when inquiring.
Prices do not includes shipping - US Shipping only
↧
FS: Previously Viewed DVD
FS: Previously Veiwed DVD - Totally Twill the Basics by Robyn Spady $12, plus shipping
↧
FS: NEARLY new 22" HD 8H 10T Loom
For Sale -- a NEW (used for one project) Harrisville Designs 22” weaving width loom.
Harrisville Designs looms are made with Rock Maple. They are sturdy and easy to set up and weave on.
Dimensions Unfolded:42” high x 28” x 34”
Dimensions Folded 42” x 28” x 18”
SAVE and BUY everything listed below for $2,150!!
New from the internet this package would cost:$2,535
A La Carte!
- HD 22” Loom + 600 wire heddles and 12 dent SS Reed $1,509
- 6 - dent SS Reed $58
- 8 - Dent SS Reed $58
- 10 - Dent SS Reed $58
- 15 - Dent SS Reed $58
- Tool Tray $68
- Reed Rack $89
- Raddle $55
- Bench $204
- Reed Rack $89
EDIT Sale on reed rack fell through so added it back
↧