The author is Lillemor Johansson and it was published in 2004. I’m hoping someone would be interested in selling.
Thank you!
↧
ISO: Swedish Rag Rugs 35 New Designs
↧
FS: Harrisville Weaving Bench
Harrisville Designs Weaving Bench for Sale.
Seat width: 9” Seat length: 27-1/2” Adjustable height: 17” to 22” Weight: 16 lbs.
Brand new this bench for $240.00. It can be yours for $180.00 (this includes shipping and insurance). Paypal only. Please PM with questions. Thank you.
↧
↧
ISO: AVL electric bobbin winder
Looking for an AVL electric bobbin winder. I am located in Seattle.
↧
ISO: Bluster Bay Super Slim Boat Shuttles
ISO: Bluster Bay Super Slim Boat Shuttles and quills. No preference on wood. Single or double. PayPal ready!
↧
FS: Schacht Wolf Pup Loom & Bench in NE Florida
Up for sale is a Virtually brand new maple Schacht Wolf PUP loom and maple Schacht bench. It has a removable back beam, and two wheels on the back legs that you can use to roll it around after you fold it up when moving your loom. It comes with one SS Reed, in your choice of a 6 or 8 dent.
Brand new the loom and bench prices out to be over $1500 from the Woolery.
I do believe this loom was woven on five times (max), there isn’t even any lint build up on the rollers and texsolv!!! I am asking $1100 for the loom and bench, (basically you are getting the bench for free).
I live in North East Florida and prefer local pick up. I am willing to drive up to 50 miles to meet you. .
↧
↧
FS: Harrisville 4-shaft, 6 treadle in SA, TX
For Sale $1000
Used Harrisville Loom
36” weaving width
4 shafts, 6 treadles
12 dent reed
Over 1000 flat steel heddles
Boat shuttle, four bobbins and reed hook
Wood tool tray on top of castle
This floor loom is in very good condition with minor scratches on the breast beam. The treadles and cables are brand new and installed myself when it was converted from a four treadle direct tie up to six treadles. This is an excellent beginner’s loom and the width gives able space for larger projects. The 12 dent reed and abundance of heddles will give you the ability to create a very wide range of projects from plain weave to twill to overshot. This same loom as listed would retail for approximately $2200 brand new. I am unable to transport so it will need to be picked up from my home in far west San Antonio. !
↧
FS: 24" 8 shaft/10 treadle Baby Mac Loom $1200
For Sale $1200
Used Baby Macomber Loom
24” weaving width
8 shafts, 10 treadles
Regular beam and sectional beam
Four reeds: 8, 10, 12, 15.
New inserted eye heddles
Boat shuttle and reed hook
Adjustable wood bench
Wood tool tray on top of castle
The loom is in good condition with minor scratches and discoloration. There is no rot or rust. It has been well cared for and has served me well. I have upgraded to a larger loom and no longer have space for this one. The Baby Macs are little workhorse looms that are extremely portable and fold up to a small foot print. They fit easily in the trunk of a car and weigh about 50 lbs. This same loom as listed would run approximately $2,000 brand new. I have included pictures of two projects on the loom to demonstrate some of the simpler items that can be woven using this loom.
I am able to deliver within 100 miles of San Antonio.
↧
ISO: Black 10/2 Tencel or Bamboo
I have some 10/2 tencel skeins that I would like to weave with either black 10/2 tencel or bamboo and neither is to be found. I did see XIE listed on a few web sites, but no one has black until October or November
If you have some and are willing to sell, please pm me. PayPal ready!
Thanks
↧
FS: 13" Emilia Rigid Heddles - New
NEW- 30/10 & 40/10 (8 & 10 dent) rigid heddles for the 13” Emilia loom. Never used. Both for $70 plus shipping from 99516. Cash only.
↧
↧
FS: Schacht Sectional Warping Equipment
Gently used Schacht tension box and 40-spool rack. Original owner; asking $400 plus shipping from 99516.. Price new is over $600.00. Cash only.
↧
ISO: Dynamic Heddle Loom or Variable Dent Reed
In search of a used Majacraft Dynamic Heddle loom OR a Schacht variable dent reed for use on a flip loom. Please PM me if you have either to sell. Many thanks!
↧
ISO: Good Wood Slant Loom
Please let me know if you have a Good Wood Slant Loom for sale. Prefer the 17 inch but would consider the 13” or the older model 12” one.
Thanks
↧
FS: 22" Harrisville 4H/4T Loom
Selling my dearly loved 22” Harrisville Designs floor loom. Features 4 harnesses and 4 treadles. Both the front and back beams fold up so the loom has a tiny footprint…about 15” deep when folded! You can even keep your project on the loom with it folded. I recently upgraded the harness tie ups to Texsolv and am getting a fantastic shed when weaving on it. The harnesses are easily adjusted with the Texsolv cord should you need to make any changes. The loom uses ratchet/pawl tension, which has served me well. Also included is the sectional warp beam upgrade (over $200 new from Harrisville!) and a bench that may need a little TLC to be fully functional.
Here’s everything that is included:
22” Harrisville Designs Floor Loom - 4T / 4H
22” 12 dent reed (some surface discoloration, but weaves fine)
18” 10 dent reed (some surface discoloration, but weaves fine)
Approximately 125 flat steel heddles (in good condition)
Schacht boat shuttle
Three Leclerc bobbins
Leclerc reed hook
Sectional warp kit
Bench - may need a little TLC to be in perfect working order
Asking $500 for everything. Located in Asheville, NC and willing to meet within a couple hours’ drive. The loom folds up quite compact and fits in my Toyota Corolla, in case vehicle space is a concern. This is the perfect loom for the new weaver, quick projects, or to take a break from a more complex project on your larger loom.
↧
↧
FS: 8S Mountain Table Loom 18"
18” weaving width Mountain table loom, 8 H. 3 reeds: 8 & 16 dent SS, 12 dent carbon steel, very little rust. Unique swinging beater allows flat beat against fell line and easy threading. Texsolve heddles and tie-up system. Total dimensions 25”w, 26.5” deep, 20” high. $600 firm. Pick up in NE Ohio, or buyer to pay for packing and shipping. Approx weight 25-30 lbs.
↧
FS: 14 Handwoven magazines
I have 14 Handwoven magazines for sale.
1993- Nov/Dec, 1994- Jan/Feb, March/Apr, May/June, Sept/Oct, Nov/Dec, 1995- Jan/Feb, March/Apr, May/June, Sept/Oct, Nov/Dec, 1996- Jan/Feb, March/Apr, May/June.
Includes a three ring binder to hold them.
Price is $25, which includes all of the above and USPS Priority Mail shipping. USA shipping only.
Thanks for looking.
↧
FS: Ashford Rigid Heddle Loom 24"
FOR SALE
Ashford Rigid Heddle Loom 24 inch. Includes stand and everything that came in the original box (the loom, threaders, warping peg, 7.5dpi reed, etc…), plus the 2nd heddle kit of one 10dpi reed & one 12.5dpi reed.
Original purchase price was $475 for all these items.I have only used this once, and I am now moving to to the United Kingdom so cannot take it with me.
$375.00 PLUS half shipping costs (which I calculate to be around $45, so half that), lower 48 states only.
I live in San Jose, CA near to Valley Fair Mall … and am happy to meet to hand off to a local person to save on shipping costs if necessary.
↧
FS: 100% Alpaca yarn from Japan $15/lb Free Shipping
Destashing 4 cones of 100% Alpaca yarn from Japan, thick and thin type, 2/3NM
Weights 1040g with cone, cone weight 100g. Net weight 940g=2.07lbs
Asking $30 per cone including shipping within US.
↧
↧
ISO: pin loom
I would like to find a gently used pin loom to play with bits and pieces of leftover yarn.
I am in Toronto, Canada
↧
FS: Structo 4-harness table loom
For sale is a Structo art-craft table loom #240. Loom works well, but it would benefit from some cleaning up. There is some rust on the reed, and some old mildew stains on the wood, which I treated with vinegar. Cat not included.
Pick-up in North Carolina, between Raleigh and Greenville, or I can meet you in the Raleigh area for the cost of gas.
$125.
↧
FS: Loomcraft 45" 8S/12T Maple
Maple Loomcraft loom 45” weaving width. 8 Shafts/12 Treadles. Selling it with it’s matching bench, and lease sticks. Comes two carbon steel reeds: 45” 12-dent reed, and 36” 8-dent reed. Approximately 1100 heddles. Treadle tie ups have been changed to Texsolv. There is enough Texsolve for all the possible tie ups! $700.
Bench is approx 32” wide and can be positioned tilted, rocking or level in two heights. Storage drawer beneath.
There are pins to lock the beater upright while threading. The warp beam is HUGE - don’t need many warp sticks.
Size is 43” wide x 36 3/4” deep. With the warp beam removed and the back beam folded up, depth is 27 3/4”.
I purchased this loom through my weaving guild in the fall of 2014. It was my first floor loom. I’ve woven kitchen towels, multiple scarves, several baby blankets, including an 8-shaft huck lace, and numerous samples.
The previous owner said the loom was from the late 1970s. It has some marks/stains on the wood, especially the seat.
I found this loom comfortable to weave on and easy to find which treadle to use without looking. You can advance the warp while seated.
Just bought a loom I can upgrade to 12 shafts - and don’t need both looms.
We are located in Tacoma, WA. (south of Seattle)
↧