FS Glimakra standard, 47" , 8h 10t, in TX

December 15, 2015, 9:40 am

≫ Next: FS: Harrisville 12 yd. warping board

≪ Previous: FS SF Area: Glimakra Julia 8/8 CM loom like new

$

0

0

 

For sale, Glimakra 47” weaving width, 8h 10t., horizontal CM

$1950

I bought this used less than 2 years ago. I no longer do much weaving at all. The loom needed some tlc when I bought it, so I repaired a few dings and polished and cleaned it up.

I also added a new bench (didn’t come with one) , alumnium beam cover (back beam has some grooves from high tension warps), all new texsolve tie up, all new texsolve heddles, warp sticks and warp stick catcher, brand new ss 12 dent reed, stadig loom feet.

I’m including a picture of one repaired area, the largest repair I made. There are a couple of other smaller repairs ( they were little dings that I didn’t want to snag or catch dust/pet hair in)

As I am not weaving as much as used to, I am also going to give the purchaser a box of yarn cones (I could really use the storage space!)

I have more pictures for anyone that is interested. Located in Dripping Springs, TX.

---

FS: Harrisville 12 yd. warping board

December 15, 2015, 10:38 am

≫ Next: ISO: glimakra ideal or Julia

≪ Previous: FS Glimakra standard, 47" , 8h 10t, in TX

$

0

0

 

For Sale -- Harrisville Designs 12 yard warping board in excellent condition. Asking $50 plus shipping. Please PM if you’re interested and include your zip code so I can look up shipping cost for you. Thank you.

ISO: glimakra ideal or Julia

December 15, 2015, 4:44 pm

≫ Next: FS: Dorothy Loom, 15"

≪ Previous: FS: Harrisville 12 yd. warping board

$

0

0

 

Hi there
I’m looking for a glimakra ideal or Julia near
Northern California. I’m in the Bay Area and can drive about
A days worth for it.

I’m thinking either could be accepted by the DH unlike the standard.

Two Julia’s listed are either sold or unshippable

Thanks

FS: Dorothy Loom, 15"

December 16, 2015, 9:44 am

≫ Next: ISO: Leclerc 9.5" regular wire heddles

≪ Previous: ISO: glimakra ideal or Julia

$

0

0

 

I need to make some room and have to start clearing out things that are not being used.

I am selling a LeClerc Dorothy table loom, 4 shaft, 15 3/4”. Comes with a 12 dent reed, a boat shuttle, a stick shuttle, lease sticks, and the heavy paper I used for winding on the warp. I’ll also throw in a small cone or two of yarn.

Asking $300 plus shipping, or best offer. It does fold, so shipping will be possible, but of course it is heavy so we can work out a fair compromise once we know what shipping is.

I live in Southern Ontario between Niagara Falls and Toronto and am willing to drive up to 90 minutes to fascilitate a pickup. In that case, I’d just ask $20 for gas (which is for sure less than shipping will cost).

ISO: Leclerc 9.5" regular wire heddles

December 16, 2015, 12:39 pm

≫ Next: FS: 22" Zach Mirrix Loom

≪ Previous: FS: Dorothy Loom, 15"

$

0

0

 

I’m looking for some (about 400) Leclerc 9.5” regular wire heddles

FS: 22" Zach Mirrix Loom

December 16, 2015, 4:34 pm

≫ Next: FS: Band Weaving (Reed, Clamp, Shuttle)

≪ Previous: ISO: Leclerc 9.5" regular wire heddles

$

0

0

 

Used once, still warped. Has top and bottom spring sets. New without shipping $382. Will sell for $295. Price is firm. Northeast Ohio. Contact me for photos.

Selling because I got into loom beading and purchased a smaller Mirrix.

FS: Band Weaving (Reed, Clamp, Shuttle)

December 17, 2015, 3:59 am

≫ Next: ISO A Handweaver's Notebook by Sharon Alderman

≪ Previous: FS: 22" Zach Mirrix Loom

$

0

0

 

Sold

For sale 12 dpi ribbon reed with handle, band clamp, and shuttle for $35.00. Price does not include packaging and shipping from Washington, DC (20009). Payment preferred via PayPal.

ISO A Handweaver's Notebook by Sharon Alderman

December 17, 2015, 4:27 am

≫ Next: FS: Weaving Books, DVDs

≪ Previous: FS: Band Weaving (Reed, Clamp, Shuttle)

$

0

0

 

Does anyone have a copy of this that they’re interested in selling?

---

FS: Weaving Books, DVDs

December 17, 2015, 4:28 am

≫ Next: FS: Schacht 18" Tapestry Loom

≪ Previous: ISO A Handweaver's Notebook by Sharon Alderman

$

0

0

 

For sale weaving book and DVDs. Prices do not include packaging and shipping from Washington, DC (20009). Payment preferred via PayPal.

Norwegian Tapestry Weaving by Maria Brekke Koppen: $42.00

Weave a Good Rug with Tom Knisely + The Efficient Weaver with Laura Fry: $28.00
Note that The Efficient Weaver has some scratching (which looks to be superfical) on the front of the DVD.

FS: Schacht 18" Tapestry Loom

December 17, 2015, 6:43 am

≫ Next: FS: Dorset & Leclerc Looms in So. Calif.

≪ Previous: FS: Weaving Books, DVDs

$

0

0

 

For Sale -- Schacht 18” wide tapestry loom in excellent condition, barely used. Comes with original instruction sheets. Sells new for $120. Asking $75 plus shipping. Please PM if you are interested and include your zip code for shipping cost please.

FS: Dorset & Leclerc Looms in So. Calif.

December 17, 2015, 9:25 am

≫ Next: ISO: 36" 8 Shaft Harrisville Designs Loom Western WA

≪ Previous: FS: Schacht 18" Tapestry Loom

$

0

0

 

20”, 4 shaft Dorset folding loom in really nice condition. 15 dent reed, flat steel heddles. Has a detachable raddle on the back beam (not original, installed by previous owner). Very cute little loom. Asking $500.

36”, 4 shaft Leclerc Artisat. In great condition. 34”, 10 dent reed and 24” 15 dent reedle + lots of flat steel heddles. Bench included. Asking $600.

I am located in Joshua Tree, CA. Local pickup welcome or would be willing to meet someone a reasonable distance. Please pm me for additional photos or questions. Thanks :)

ISO: 36" 8 Shaft Harrisville Designs Loom Western WA

December 17, 2015, 1:48 pm

≫ Next: FS: weaving kits

≪ Previous: FS: Dorset & Leclerc Looms in So. Calif.

$

0

0

 

Seeking 36” 8 Shaft Harrisville Designs Loom or similar in any condition. Need something light weight that folds and has low breast beam height. I’m in Western Washington (near Tacoma) but willing to travel as far as Bellingham or Portland or maybe can meet up somewhere in the middle.

FS: weaving kits

December 17, 2015, 4:41 pm

≫ Next: FS: Ashford 8 Shaft Table Loom Sf Bay Area

≪ Previous: ISO: 36" 8 Shaft Harrisville Designs Loom Western WA

$

0

0

 

These two kits with U. S. Shipping included for $45.00 PayPal.

The top picture is hand painted rayon rigid heddle kit that makes a scarf 9” wide and 84” long. Retails for $32.00

This lower picture is Transitions rayon boucle kit that produces a scarf that is 8” wide by 84” long. Retails for $28.00. Both in original sealed packaging.

Will ship tomorrow am from non-smoking beagle friendly home

FS: Ashford 8 Shaft Table Loom Sf Bay Area

December 18, 2015, 10:26 am

≫ Next: FS: Schacht Electric Bobbin Winder

≪ Previous: FS: weaving kits

$

0

0

 

I have a 16” wide Ashford 8 shaft table loom for sale. It folds for storage and comes with a stand that also folds. The stand has shelves and four treadles so it can be used as a small floor loom. It has a 10 dent stainless steel reed and Texsolv heddles.
Asking $650
Prefer local pickup in Petaluma, CA, or meeting nearby, but I might be able to disassemble the stand and ship it (94952).

FS: Schacht Electric Bobbin Winder

December 18, 2015, 11:06 am

≫ Next: FS: 8/2 Cotton Clouds Cotton- 4 cones

≪ Previous: FS: Ashford 8 Shaft Table Loom Sf Bay Area

$

0

0

 

For Sale: Schacht electric bobbin winder. It seems like an older model, but I’m not sure how old since I got it second-hand. It’s about 21” x 5” x 4” and works well.
Asking $55 plus shipping, or it can be picked up in Petaluma ((94952).

---

FS: 8/2 Cotton Clouds Cotton- 4 cones

December 18, 2015, 11:48 am

≫ Next: FS: Dorothy 15-3/4" table loom & stand

≪ Previous: FS: Schacht Electric Bobbin Winder

$

0

0

 

SOLD
$85 includes flat rate shipping in US for all 4 totaling 72.5 oz./4.53 lbs.

Pay pal preferred

FS: Dorothy 15-3/4" table loom & stand

December 19, 2015, 6:00 am

≫ Next: FS: bench and reindeer pad

≪ Previous: FS: 8/2 Cotton Clouds Cotton- 4 cones

$

0

0

 

For Sale -- LeClerc 15-3/4” wide Dorothy table loom and stand. The loom is a 4-harness model with approximately 400 wire heddles. There is normal wear but the loom is in good working condition. It comes with an 8-dent reed and lea sticks. It sells new for $750. Asking $450 plus shipping. There is also the LeClerc table loom stand but I am offering that separately for sale. It is in excellent condition and sells new for $235. Asking $125 plus shipping. Please PM and let me know whether you’re interested in the loom and/or the stand. Include your zip code so I can look up shipping costs. Thank you.

FS: bench and reindeer pad

December 19, 2015, 12:38 pm

≫ Next: FS: 50 inch Norwood Cherry Loom

≪ Previous: FS: Dorothy 15-3/4" table loom & stand

$

0

0

 

Like new adjustable Glimakra weaving bench. $250. Plus shipping

Like new Glimakra reindeer skin bench pad $75. Plus shipping

Both for $275. Plus shipping

FS: 50 inch Norwood Cherry Loom

December 20, 2015, 10:53 am

≫ Next: ISO: Beginner RH loom to grow with me

≪ Previous: FS: bench and reindeer pad

$

0

0

 

• More Pictures at Flickr:
https://www.flickr.com/photos/40846643@N06/?

• 50 inch Norwood Cherry Loom.
• 4 harnesses + 4 Later; 6 treadles.
• currently partially disassembled as I welcome another loom.

• Cash and local pick-up.

• Price for Ravelers: $300; Price @ CL: $400.

MOD. Edit: Added photo
fibremaniac, you may want to add more photos - your photo is really difficult to see what the loom really looks like.

ISO: Beginner RH loom to grow with me

December 20, 2015, 11:55 am

≫ Next: FS: AVL Bobbin-Winding Guide

≪ Previous: FS: 50 inch Norwood Cherry Loom

$

0

0

 

I am a newbie, wanting to start weaving. I’d like to make both narrow bands (garters, straps, and decorative clothing trims for reenactments) and wider stuff like scarves, small yardage, blankets/throws (36”-48” wide or so, I figure seamed or doubleweave), shawls, and the like (for modern use & reenactments). In reenacting, we have the concept of Look twice, Spend once: getting a make-do item that needs replacing means spending twice or more. Hubby can make me an inkle loom for the narrow stuff (I don’t plan to WEAVE at reenactments, I know inkle looms’ve only been around since the 1930’s) but I’d like to go with a used name-brand loom for wider stuff.

What I’d like is a rigid heddle loom, in the 16”-25” width range, that has the capacity to add a second heddle later, can use different dent size heddles (ruling out Cricket, Sample-it, or Beka’s SG series) can easily clamp to a table, but is under $200.00 (ruling out new just about everything else). I don’t necessarily need it to fold, nor a stand now, but that would be nice to have later. I can possibly go as high as $250 for the right loom, but the budget is tight this year & the next as we’re house hunting. Please PM me if you have one to sell.