Maine Made Cherry Swift by Tom Siske-Never Used
32 inches tall, accommodates 72 inch skein
Currently Retails at $250 without shipping at Halcyon Yarn
For Sale $235-Shipping included within the US
↧
FS: Maine Made Cherry Swift by Tom Siske-Never Used
↧
FS: Louet Sectional Warping Equipment - New Price
BUY BOTH SPOOL RACK AND TENSION REGULATOR FOR $350/PICK UP ONLY
Louet Spool Rack w/32 Spools with built in Raddle $225 Excellent condition (new price is $520, replacement bobbins/spools are $9.25/ea) no longer available through Louet USA website. Please pick up in Central NH. I don’t know if I can ship the spools safely.
Louet Tension Regulator $165 (new price $315) with yardage counter (calibrated in yards, not meters). Shipping extra.
Louet Bobbin Winder older model $65. Works with the spools from the rack and for paper quills. (Great condition) Shipping extra.
Located in Lakes Region of NH. Paypal or cash.
↧
↧
ISO: ss reed 18 dpi or more, about 30"-33.5"
Hello, I’m ISO: ss reed 18 dpi or more, about 30”- 33.5” or longer. The hight doesn’t matter, but preffer 4.75”.
Willing to pay for shipping to NJ. Can pay for international as well.
Thank you! :)
↧
FS: 64" Macomber Loom w/weaving studio $3000/obo
FS: Macomber 64” Model B4K/Serial #4486, incl. extras
Offered at $3000 or best offer. Selling a one-original-owner’s Macomber Add-A-Harness Loom (inspected by a Macomber expert who agrees it’s in excellent condition throughout), vintage is mid-1970’s. Model #B4K. Macomber Serial #4486. 64” 10 Harness (with a 10 harness frame) Macomber Loom. It is currently set up for double weaving. Everything works exactly as intended, and is ready for you to demo. It has a plain beam in the top position and a sectional beam w/1” sections in the bottom position. Includes matching Macomber 40” maple bench, many many extras…even the original Macomber owner’s manual and set up instructions. Selling a weaving studio complete package included in this price. Extensive weaving tools with wool, mohair, and cotton textiles (most are in sealed bags) are all available for negotiation to really sweeten this deal. You will be delighted with what you find. It’s too much to list, you’ll just have to make an appointment to come see and take some, or all with you. Price listed is for the loom, its Macomber loom accessories, and the Macomber bench..the wool and textiles can be included if the deal is right. This loom is located on a home’s first floor main living level sunroom for ease of removal from Lynchburg VA 24503. The wool and materials are located on a 2nd floor of our home. You are on your own for arranging movers to move it for you. I will help and cooperate with any of your arrangements for moving it, as necessary. Sale date to be 1/6-1/12/2016. Saturday 1/9 is already booked 10am-4pm for another matter, but we are available early that morning before then. Please feel welcome to contact me for any questions. I’m happy to provide many photos on request. Cost break down: I recently spoke with Macomber Looms in York ME. To repurchase this high quality loom and Macomber extras alone, you’d pay exactly $7019 total, not including their $500+ shipping and who knows how much sales tax, and you’d wait 6 months for it to be built again. This loom, model B4K features shown in today’s retail pricing: 64” 10 harness loom - $6,197.00 3/4 yd sectional - $394.00 1” sections - $78.00 40” Bench - $350.00 Today’s replacement cost: $7,019.00 Pre-owned values retain between: 40% $2,807.60 and 60% $4,211.40 Offered at $3000 with extras, or highest or lowest best offer. There’s much more than what’s shown, I promise. Individual private appointments only. Please leave your contact information and I’ll speak with you promptly. Thank you so much for looking.
↧
FS: Harris Table Loom
FS: Harris Table Loom. Bag of loom’s metal parts not shown in photo (yet). Pick up in Lynchburg VA 24503 from 1/6-1/12/2016. Price not set yet. Make your best offer and message me your contact info for a prompt reply. Thanks for looking! -graham
↧
↧
ISO: Temple
I am still looking for used temples from 16 to 36 inches. Please PM me if you have one for sale.
Thanks,
Ann
↧
FS: 10 Cricket Loom with Extra's
10” Cricket Loom Plus Lot’s of Extra’s $200.00 plus shipping.
Only used once. Includes original box with all parts including Instruction Manual.
Extra’s are: Variable Dent Reed frame and reed sections. 2 -5-dent, 2- 8 dent, 2 10-dent and 2 12-dent. Purchased from Paradise Fibers. Brand new in package, never used.
And Cream Sheep weaving loom heddle hook - polymer clay purchased from The Clay Sheep on Etsy. Also brand new, never used.
Currently fully assembled. Can be disabled for shipping purposes or shipped assembled. Purchasers preference.
Willing to ship international, will just need to research shipping options available.
Payment through Pay Pal. Please PM me with any questions or inquires.
↧
ISO: Kessenich Table Loom 25"
I am looking for a Kessenich table loom in the 25” weaving width. I have no preference on 4 vs. 8 shaft, but I would prefer one with a stand (not a deal breaker if it doesn’t have one though). I’m currently borrowing a friends 14” and I love it, but I want the wider width to play with.
↧
ISO
This post was deleted by AuntieMfromVA
↧
↧
ISO: Ashford 16 Shaft
I am searching for an Ashford 16 Shaft 24” table loom. PM me if you have one you would like to sell or know of one that is available. I am located in Northern Virginia.
↧
ISO: 45" reeds: 12 and 15 dent
happy new years Folks!
I am looking for two reeds for my Nilus II (Leclerc), named Gintaras.
I would be okay with a tiny bit of surficial rust, because I have the product to clean the rust off with.
But I would like the reed dividers to be straight and evenly spaced. No warping.
ISO: one 12 dent reed at no more then 45 inches wide.
ISO: one 15 dent reed at no more than 45 inches wide.
Thank you.
ETA: I am currently in Central Texas.
↧
FS: 22" Folding 4H/6T Harrisville Loom, $350 (FL)
Harrisville folding 22” 4 harness, 6 treadle floor loom. Small and portable. Comes with warping board, shuttles, and lots of yarn (!).
I bought this and never used it. Please help me clear out space for the new year.
Asking $350, pickup only in Gainesville, FL
↧
ISO: Starting WEave Stuff :)
HI, I just got my first loom ! A Wolf pup. It didn’t “come” with anything. I am in search of a boat shuttle, warp sticks, raddle, sley hooks, bobbins and winder. Blessings.
↧
↧
FS: Gilmore Shuttles
Three Gilmore weaving shuttles in excellent condition. Designed to be used with paper quills, but can be used with plastic bobbins shorter than the opening. Asking $20 each plus shipping, or all three for $50. Thanks!
↧
FS: Mastering Weave Structures by Sharon Alderman
Mastering Weave Structures
Very good condition
$75.00 + shipping
Open to offers, need to sell
↧
FS: Large SS Reeds
Greetings!
I have several reeds available for sale. Most are stainless steel (marked SS), but one is carbon steel (marked carbon). Lengths are from tip to tip. I have included current Woolery prices for reference.
Prices do not include shipping, which will be at actual PayPal Ship Now cost.
All of the reeds are straight and fit into my 48” Cranbrook with no issues. There is no damage, warping, or bending to any of the spaces although the 6-dent carbon is a little dustier than the others.
50” 6-dent SS, $85 ($150 new)
48” 4-dent SS, $75 ($145 new), pending
42” 6-dent Carbon, $50 ($90 new)
37” 8-dent SS, $70 ($120 new), pending
36” 5-dent SS, $60 ($112 new)
36” 4-dent SS, $60 ($122 new), pending)
x-posted in Used Tools/Equipment
ETA: shipping is about $10-12 in the US
↧
ISO: Schacht Wolf Pup LT loom
Sometimes we get a loom and we love it and
then we think we have too many looms and so
we sell the loom we love even when warned
not to do so and that we’ll regret it, and we
convince ourselves we are doing the right
thing and do it anyways. That’s me: “Someone.”
Do you have thoughts of selling YOUR Wolf
Pup LT? (That’s the Pup model with 4 shafts and 6 treadles.)
Is it in great condition with no problems?
Would moving it along (selling it) help you
get something YOU want and thus get
me what I want?
I do not need the following with the loom:
treadle tracker
trap
raddle
raddle brackets and cap
and truly don’t need:
boat shuttle/s
bobbins
warping board
yarns
books
Just the loom will be all that’s necessary!
If you have 100 heddles for each shaft that
will be super but otherwise I think it should
have 75 heddles per shaft.
To offer me a price on your loom and your
location in the New England area - if not 3
or 4 hours away from me - and for me to
pick it up and pay cash please contact me
via private message which is according to the
rules or your post will be deleted and I will
have no idea you were responding to this
ad.
(I like to follow the rules here.)
I have already checked the prices of a
new Wolf Pup LT and they range from $1303
to $1405. I am looking for a preowned
price.
I’m not in a hurry so you can think about it
because I wouldn’t want you to make the
same silly mistake I made. (grin)
↧
↧
FS: Old Books on Weaving
Hi - Three old texts on weaving. All clean and in good condition from non-smoking home.
Practical Textile Designing - 1945 $10 plus shipping
Fiber to Fabric - 1945 - $10 plus shipping
Weave Construction and Cloth Analysis - 1905 $30 plus shipping
image.jpeg
↧
FS: Pendleton Floor Loom
Pendleton Floor Loom for Sale. 4 Harness loom. Loom itself is 54” but weaving width is 46”. Loom sort of folds up to make it more compact when not in use. Includes 40”, 8 dent reed. Great condition. I live in the Cleveland, OH area.
$650
image titlehttps://flic.kr/p/BPsqnB
Mod. Edit: added photo
↧
ISO: Jim Hokett mini warping reel
Looking for a Jim Hokett mini warping reel.
↧