Before I go out and buy a mini cone somewhere, does anyone have a partial cone of 3/2 black hanging around? Or a full cone that you know you’ll never use and don’t mind winding some off?
I’d like to use it for tablet weaving, so I don’t need much. About 100 yds should do it.
The worlds finest American grown
Supima® cotton
Cheryl just got an LL Beam catalog with a listing stating “made with the worlds finest American grown Supima cotton” then on the bottom it said imported. So they took this Supima yarn shipped it overseas and had them make the garment and send it back here to be sold.
Well you can purchase the world finest Supima cotton yarn from me in 7 colors and natural. You can then send it overseas and have them make you a garment or you could weave or knit your own garment and not pay the overseas shipping cost.
12/2 Supima® cotton in 7 colors
$19 pound on 1 pound cones
Get to know this yarn special
Take 10% off your total order both dyed and natural yarns
Sale ends at Midnight February 15, 2016
See the colors here:
http://www.handweaver.us/supima%20cotton.htm
This is the red
edited for spelling
Loom is sold
FS:
LeClerc 22” 4H 6T Artisat jack loom, bench and extras
Folds up for travel or space-saving
Craigslist ad here loom for sale
PM me here or email via the ad
$550 for pick up near Amsterdam, NY
loom is sold
I’m selling my “backup” Ashford SampleIt 8” rigid heddle loom. I bought it last year at Paradise Fibers, thinking that I can have two projects at the same time … of course the reality is that I have barely time enough to weave on one project. Therefore… selling.
The loom is still in it’s original shipping box, unassembled. I have it listed on ebay for $136 incl. shipping within the US. I invite you to message me to make an offer.
4H/6T Maple Baby Wolf made in 2008. This loom is in great shape except for a couple minor cosmetic blemishes that you can see in the pictures. The loom has shinny new heddle bars, high castle, stroller, inserted eye heddles, tie-ups and (1) 12 dent reed.
Pick up only in the Outer Banks of NC, specifically Kill Devil Hills. $1200 cash.
Link to more pictures in my stash:
http://www.ravelry.com/people/LindaIhle/stash/4-shaft-bab...
Handwoven Magazines $4 each
Here is a list of what I have. Please send a PM to me telling me which issue or issues you are interested in. If you purchase 3 or less the shipping is 5.95. If you are interested in more please contact me for a shipping quote.
2001 #106
2003 #113, 114, 115, 116, 117
2004 #118, 119, 120, 121, 122
2005 #126
2006 #128, 129, 130, 131, 132
2007 #133, 134, 135, 136, 137
2008 #138, 139, 140, 141, 142
2009 #143
Hi! I am searching for used AVL flyshuttle(s). Please let me know if you have one (or four) that you would like to sell. Thanks!
I am the new owner of an 8 harness loom, so my 4 harness Baby Wolf has to go. Comes with the stroller, a front tray (super handy!) and a hook.
I am the second owner. This loom was made in 1989 and was used during the 1990s. It sat for a while until I bought it from the owner’s son in 2010-ish. I have been using it ever since. I have had no problems at all with it.
The wood has a lovely golden patina. You can see in one of the photos below that it was stored folded and the color did not change the same under the brackets.
Asking $900. I am in Denver (80207) and it would be bulky and expensive to ship. You are welcome to have someone come and crate it and ship it of course.
FS - Cranbrook/Bexell 48”- 8 harness loom. String heddles, Ronja Warping Attachment, 8 dent reed, lease sticks, shuttle shelf, rear storage shelf, plain beam,no bench. $1500. Pick-up
San Diego area.
Four shaft 36” weaving width loom
Comes with 6 dent reed, small and large shuttle and bobbins, extra heddles, and reed hook.
Loom is in excellent condition and ready to start your weaving project.
$300 Local pickup in St. Louis, MO
Selling my 32’ Kromksi Harp loom and stand in the next couple of weeks as I’m about to embark on an overseas move. The loom is very lightly used (the project on it in the photos is the only project it ever saw).
Asking $200 for loom and stand. I would prefer someone who can meet me in the Seattle area for a hand-off, but if the buyer would like it shipped, it is at their expense.
Hello! I live as a full-time volunteer/missionary in a community for the chronically homeless. (It’s called The Community First! Village, and you can get a sense of what we do here
I’d love to purchase a few small rigid heddle looms (Cricket, SampleIt, etc.) that I could use to start a therapeutic weaving group among our residents. We live in RVs and “tiny houses,” so the smaller looms (under 15 inches) would be best.
I don’t have a budget for this project and would be buying them personally, so my ideal price would be $50-$100. I realize that’s a low range, but perhaps someone has a little loom collecting dust and would be willing to sell it at a low rate.
PM if you have any looms or leads.
Many thanks!
Bethany Hebbard
P.S. We’re located in Austin, Texas, so if anyone is within an hour or so, I could pick up directly.
Just picked up a vintage pioneer loom manufactured by northwest looms at a thrift store this week. Looking for a manual for it.
Becky.
I haven’t used my 40-shaft loom since acquiring my new jacquard loom, so it’s time to let it go to a new home where it will hopefully be well-used and loved. It’s in good working condition, and quite a bit of work and $$ have gone into upgrades/accessories/bells and whistles.
Here are the specs on the loom and all the things that come with it:
The loom is an AVL 40, the predecessor to the A-series
Options and accessories:
Two sectional warp beams, one 1-yard circumference and one 1/2-yard circumference
AVL sandpaper beam
Bottom-swing beater
AVL new-style auto-advance
Fireside rolling temples
4000+ heddles
AVL Warping Wheel, which allows sectional warping from as little as a single cone, without spool racks and tension box.
tons of 48″ warp sticks if you would rather beam as a plain beam
a large dolly mounted on leveling casters (which convert from feet to wheels) to enable the loom to be moved about easily.
8 reeds:
5-dent (48″)
7-dent (48″)
9-dent (40″)
10-dent (48″)
12-dent (36″)
15-dent (48″)
16-dent (48″)
18-dent (48″)
20-dent (48″)
I’m asking $15,000 for the entire loom package. I will disassemble the loom (and take lots of pictures) but crating and shipping are up to the buyer (but I believe that can be handled remotely). The loom is located in Sunnyvale, CA, and local buyers are welcome to come by and try out the loom. More photos can be furnished if you are seriously interested.
FS: Ashford Sample It Loom plus 2 extra heddles.
This includes everything that comes with the loom new plus the 10 and 12.5 dent heddles. Gently used in great condition. Price includes shipping. Paypal only. $150.
I have for sale 3 boat shuttles for a larger loom. Larger shuttles are 20 inches long the smaller is 14.5 inches long. $40 plus shipping for all three.
I was working on restoring these looms, but I’ve realized that I just don’t have the time or space for this project anymore.
1.
For Sale
Mostly restored - Some permanent marker and other blemishes remain on the frame. Original flat steel heddles, brand new 10 dent reed.
$300
2.
For Sale
Somewhat restored - Frame is untouched (dirty, permanent marker, paint, tape, etc), everything else is good. Heddle bars were derusted and polished. Original flat steel heddles and a brand new 10 dent reed.
$250
3.
For Sale
Somewhat restored - Frame is untouched (dirty, permanent marker, paint, tape, etc), everything else is good. Heddle bars were derusted and polished. Original flat steel heddles and a brand new 10 dent reed.
$250
4.
For Sale
Bargain Buy - Frame is untouched (dirty, permanent marker, paint, tape, etc) and the worst of the lot. Beater cap had been broken and glued back together. Everything else is good, heddle bars derusted and polished. Original heddles, NO REED.
$150
ETA: Also willing to consider trades.
I’m looking for warping sticks to use on my 24” Kromski Harp. Please pm me with price including shipping. Thanks!
Im iso a couple of things an efs shuttle with tensioner
Prefer something around 11”
A 12 dent reed 45 ”
Tension Box
Im in Canada but can ship to usa border and pick it up if easier for the seller :)
Thanks
Hopefully in the Mid-Atlantic Region of the US (PA, MD, VA, WV, etc.
Thanks.
