FS : Saori Selfinovation through free weaving
Book about Saori weaving
Shippingcosts to US/EUROPE : $15
Price for the book : $ 40 without shippingcosts
Bought book 1,5 month ago so as Brand New
↧
FS Saori Book
↧
FS: Tapestry Weaving VHS videos
Two Nancy Harvey Tapestry Weaving videos. Level 1 and 2. $10 each plus shipping. Purchase both and shipping is free. Cross posted in Tapestry Weaving.
↧
↧
FS: Ahrens and Violette Loom (AVL)
Very nice Ahrens and Violette Loom (AVL), 36 inch weaving width, 10 dent reed with slight rust, two treadles, extra pins, 12 harnesses, string heddles. Message me with additional questions. Loom located 2 hours north of Pittsburgh PA. If you want to see the loom contact me. Asking 1850.00. Many other images of the loom available.
http://s1268.photobucket.com/user/ldkocher/media/IMG_0068...
↧
F.S.- Schacht Wolf PUP Loom & Bench
Up for sale is a Virtually brand new maple Schacht Wolf PUP loom and maple Schacht bench. It has a removable back beam, and two wheels on the back legs that you can use to roll it around after you fold it up when moving your loom. It comes with one SS Reed, in your choice of a 6 or 8 dent.
I bought it to add to my collection thinking I would take on students but moved out of state in the meantime. My new home is much smaller, with no basement or second floor so some things need to go.
Brand new this prices out to be over $1500 from the Woolery.
I do believe this loom was woven on five times (max), there isn’t even any lint build up on the rollers and texsolv!!!
I live in North East Florida.
I am asking $1100. I prefer local pick up and I am willing to drive up to 50 miles to meet you.
Also up for sale is a virtually brand new raddle for $75, which retails new for $112.
↧
ISO: Reeds/ Heddles for Beka SG20" loom
I am searching for Reeds / Heddles for a Beka SG 20” loom. I am getting back into weaving and I am getting a new loom for my birthday. I would like to find some gently used Heddles in the 10 or 12 dent range for the 20” loom. I am in Ohio.
Thanks for your help!!
Melissa
↧
↧
ISO: Good Wood and Weave-it Looms
I’m in search of a Good Wood loom with the magic heddle and a vintage weave-it loom or other similar pin loom. If anyone has either of these that aren’t being used I’d love to give them a good home.
↧
FS: Norwood 30" 8H 10T floor loom
Beautiful 8S 10T Norwood 30” loom, completely taken apart and ready for shipping. In very good condition, with some dents and dings due to age. Also one of the treadles has a small metal plate on it where it became damaged, otherwise the loom is in very good condition. $750. Pick-up from SE Iowa or I can arrange shipping via FedEx for an extra $200.
↧
FS: 11" AVL Tensioned End-Feed Shuttles
I have two 11” AVL Honex Tensioned End-Feed shuttles for sale. Used a few times, in excellent condition. Each shuttle includes 3 pirns. Asking $125 each, which includes shipping and insurance within the Continental U.S.
↧
FS: 24" 8-Shaft Ashford Loom with Stand in Georgia
$720.00 (PayPal only) includes the following:
- 8-Shaft Ashford table loom with 24” weaving width
- Stand with side shelves and 4 direct tie-up treadles
- Ashford threading hook and Ashford sleying hook
- 10-yard warping board with detachable leg stand by theknitstore on Etsy
- 1000+ Texsolve heddles (to thread over 40 epi)
- New, unused Glimakra low-profile damask shuttle
- New, unused Schacht small maple shuttle
- Lease sticks and Ashford raddle
- Ashford wrenches and hex key
- Complete manuals for loom and for stand
- Cardboard warp strips and heavy brown paper for warping
Loom has repaired crack in top of castle; treadle bar holder has crack. Neither flaw affects weaving, but the loom has been priced to reflect both. PM me for photographs.
I will not ship the loom, stand and accessories; they may be picked up or I can deliver the package for free to Milledgeville, Macon, Augusta or Greensboro, Georgia. I will also deliver to Watkinsville or Savannah, Georgia for an additional $35.00.
The loom is currently set up on the stand to be used with the treadles as a four-shaft loom. If the buyer prefers, I can set up the loom with eight shafts to be used on the stand or a table with eight levers instead.
↧
↧
ISO: 36 inch Raddle
This post was deleted by BennyRay
↧
ISO: 22-24" 5 or 6 dpi reed
Any chance there is someone out there with a 22-24” 5 or 6 dpi reed that they would like to re-sell? It is for a Harrisville 22” loom.
Thanks in advance!
↧
FS: Le Clerc Artistat IV Floor Loom 22" (SW Michigan)
I am selling my 1975 Le Clerc Artistat 4 harness, 6 treadle floor loom. It has a 22” weaving width and folds for storage/travel. There are 447 heddles on the loom and I have 178 extras that will go with it too. Also with the loom is an adjustable height bench with a little storage compartment, 2 reeds 10 and 12 dent, 2 shuttles, 8 bobbins, raddle, 3 lease sticks, 4 binder clips, sley hook, square head screwdriver, and original paperwork. The raddle is designed to go in the beater bar but I also have clamps so you can put it on the front or back beam if you want. Most of the accessories are quite new. This would be pick up only. Willing to drive to meet someone. $450
Thanks for looking!!
↧
ISO: Schacht Yardage Counter
I am in need of a Schacht Yardage Counter in the worse way.
I have cross posted my plea in multi groups. Thanks
↧
↧
ISO: Glimakra Band Loom
Please PM me if you have one you’d like to sell. TY
↧
FS: End feed hand shuttles
$75 plus $10 shipping in the lower 48 States. Two End Feed Shuttles hand crafted for Helen Jarvis years ago. I took a workshop on Coverlet Weaving from Helen about 20 years ago and convinced her to sell me two of the shuttles and 10 Pirns. They are well balanced and well made. The picture from Helen’s book shows her using two of the same shuttles while weaving a coverlet.
↧
FS: Toika Warping Mill
Toika Warping Mill: Quality Finnish constructed warping reel, 2 yards per turn, constructed of hard birch, stainless steel post and stays, ball bearings for smooth rotation, a joy to wind your warps with! Located in Vermont, $379
↧
FS: Toika Eeva Countermarche Loom
Toika Eeva 120cm, 47” weaving width, 2 years old, extra back and warp beams, 10 dpi stainless steel reed, worm gear, treadle gate, a dream to work with! Located in Vermont, $3,500
↧
↧
FS: Harrisville Warping Board
I have a Harrisville Design warping board for sale for $50 (retail is $130).
It holds a full 12 yard warp and can accommodate two crosses. It can be easily disassembled for more convenient storage when not in use. The board is in good condition and has been finished (the kits when bought new come unfinished). It has two holes drilled in the frame that I used for hanging on the wall and two pegs had a few puppy teething marks that I sanded off so they are lighter.
I live in the Pittsburgh, PA area for a local sale. I will also be at Maryland Sheep & Wool next week on Saturday and 1/2 of Sunday and can meet up at the festival to deliver if anyone is interested.
I have not priced shipping, but given how heavy the board is, it would likely be around $25-30. If you are interested in shipping, pm me and I can investigate.
↧
FS: Wet Finishing for Weavers DVD by Laura Fry
Wet finishing for Weavers DVD in very good condition--Viewed once. $10 includes media mail shipping in lower 48 states.
↧
ISO: Sunna, Sigga or similar band weaving heddles and book
Interested in trying band weaving for the 1st time and would like used tools and Sousan Foulks books or similar bandweaving books and tools. My goal is Scandinavian, particularly Swedish and Sami, bands but not exclusively if someone is divesting of other band weaving things.
↧