Quantcast
Channel: Ravelry Discussions - Warped Weavers Marketplace
Viewing all 10867 articles
Browse latest View live

FS: Louet Hollandia - Oregon - 110 CM - 8 Shafts/15 Treadles

$
0
0
 

LOOM IS LOCATED IN EUGENE, OR - $1800
I purchased this loom completely disassembled a few years ago, and completely cleaned & restored it to working condition. It was really in good shape when I got it, but needed cleaning. All texsolv was washed before it was replaced on the loom. I have a few extra parts that go with the loom, along with the original manual. It is 110cm weaving width, approximately 61” wide x 39” deep x 49” tall, and is a parallel countermarch loom. It comes with hardware on the loom for 14 treadles, but there’s one more treadle and the accompanying bracket to mount it to the loom, I just didn’t do so. I will also include a 12 dent reed and a bench with sliding seat.

More photos on my project page - http://www.ravelry.com/projects/DianeOregon/louet-holland...

Pickup only - EUGENE, OREGONLouet Hollandia Loom Rebuild


FS: Schacht bobbin winder

$
0
0
 

Sale pending, thanks for looking.

For sale today I have an older Schacht single-end bobbin winder, $65 Paypal only, including US shipping from Michigan.

Winder.jpg

Complete, with original instruction sheet, extra washer, and hex key.

This winder has the following defect which does not affect winding: the large turning wheel is slightly out of round. It’s not noticeable in the photos but it’s plain to see when winding a bobbin.

FS: Harrisville Designs loom

$
0
0
 

For sale: Harrisville Designs floor loom. 8 harness, 10 treadle. 50 inch. Not sure of the year, but the number on it is: 50/8 307. Included are two reeds, a 10 and a 12 dent. Also a spool winder. $1,350 or Best reasonable offer. Located in New Hampshireloom

FS: Harrisville Loom Bench

$
0
0
 

Harrisville Loom Bench (smaller sized one)

IMGP0530.JPG
Used in good condition. $180 + S/H
(New = $240 + S/H)

NO S/H << if you are will near this week’s Maryland S&W Wed through Saturday, I’ll have it with me.

FS: Leclerc Warping Frame & Inkle Loom

$
0
0
 

FS: Leclerc Cendrel Warping Frame and Inkle Loom

IMGP0541.JPG

32.75” tall, 28.5” wide and 14” deep. 9lbs.
$199 + S/H
(new = $267+ S/H)

NO S/H if attending 2016 MDSW (Wed-Sat pm) : ) <<

ISO *Rosepath Motif: An Approach to Weaving Design* by Margaret B. Windeknecht

$
0
0
 

ISO a copy of Rosepath Motif: An Approach to Weaving Design by Margaret B. Windeknecht in good or better condition at a reasonable price. PayPal ready.

ISO: 36" Reed

$
0
0
 

ISO

I have a Harrisville 36” loom and I’m looking for some reeds in good condition. Ideally 10, 12, and/or 15 would be great, but try me on other dents if you have them.

The reed doesn’t have to be from Harrisville, as long as it fits in my loom.

FS: Books, Weaving Books

$
0
0
 

Weaving and spinning book for sale - nice books. I accept Paypal. Prices do not include shipping. Please reply in a timely manner. Thank you

04-15-2014 11;02;55AM (528x640).jpg
Nice copy of Creative Overshot by Margaret Windeknecht. Cover may show a little wear. $15.00

IMG_0854 (640x601).jpg
Mastering Weave Structures by Sharon Alderman - nice book - hardcover $45.00

06-04-2014 03;09;02PM (465x640).jpg
Color in Spinning by Deb Menz - softcover. $35.00

IMG_1922.JPG
Summer and Winter by Donna Sullivan - soft cover - this book has had a spiral binding added, great for laying flat - has a name embossed on title page - book is in super nice condition. $30.00


Books, Weaving Books For Sale

$
0
0
 

This post was deleted by shadeofperiwinkle

ISO: 4 or 8 shaft 22"-24" Baby Mac

$
0
0
 

I am looking to buy a 4 or preferably 8 shaft Baby Mac, weaving width 22” - 24”. Weaving width is negotiable. Located in the Eastern WA/North ID area.

ISO: 25" 10 or 12 dent reed

$
0
0
 

Hello! I picked up a Rasmussen 4S table loom not too long ago, and I am looking for a 10- and/or 12-dent reed to fit it. The reed it came with has external measurements of 25 1/4” by 4 1/2”. Please message me if you have a reed that would fit that you’re willing to sell! Thanks!

ISO: Glimakra Ideal Rachet Wheel + Pawl

$
0
0
 

This post was deleted by Shearling

ISO: Glimakra Ideal Rachet Wheel + Pawl

$
0
0
 

Seeking Ideal Rachet Wheel and Pawl. (This is a bit smaller wheel than those on a Standard loom.)

Silly me! I bought bits and pieces of an Ideal 100cm loom, and am looking now for all the cross bracing beams (except cloth and warp beams) and a complete beater assembly.

I hear that Ideal looms in some European countries head off to the scrap pile. If you have access to one, save some parts for me! I’d be happy to pay surface shipping and extra for your time and effort.

Help save a loom!

FS NEW ELECTRIC BOBBIN WINDER, CONE WINDER AND LOTS OF NEW BOOKS

$
0
0
 

ALL ARE SOLD except for the DVD, Fiber Artist Guide to Color, and Joy of Handweaving

FS The following items, i sold all weaving stuff missed it bought all new and never got back into it.

all prices include shipping within the US lower 48 states. Paypal only, immediate payment required.

SOLDNEW dbl electric bobbin winder, cherry wood, winds bobbins, spools, pirns no adjustment needed when changing size, electronic foot control $95
image.jpeg
SOLDCone winder with 6 bobbins, works great used it for winding cones for sock knitting machine $49
image.jpeg
The following are books
SOLDNEW Weaving designs minature overshot by Bertha Gray Hayes $25
image.jpeg
SOLDNEW Doubleweave by Jennifer Moore $15
image.jpeg
SOLDNEW Learning to weave Deb Chandler $13
image.jpeg
SOLDNew The magic of handweaving the basics & beyond, by Sigrid Piroch $15
image.jpeg
SOLDNew signed! Weaving for Beginners Step by step by Peg Ostercamp $35
image.jpeg
SOLDNew The Handweavers pattern directory by Anne Dixon $18
image.jpeg
Like new Joy of Handweaving by Osma Gallinger Tod $10
image.jpeg
SOLDNEW Best of Weavers Twills & Thrills by Madelyn Van der Hoogt $17
image.jpeg
Used but excellent contition dust cover has some wear A Handweavers Pattern Directory by Marquerite Porter Davison $18
image.jpeg
SOLDUsed and shows wear Handweavers Notebook signed by Sharon Alderman $10
image.jpeg
SOLDUsed but like new the Weavers Companion $12
image.jpeg
DVD STILL SEALED Fiber Artists Guide to Color wih Laura Bryant $10
image.jpeg

FS: Kromski 32" Rigid Heddle loom

$
0
0
 

Selling my 32” Kromski Harp Rigid Heddle loom.

Everything is great- I just bought an eight-harness baby mac last fall and now I never use my harp.

Comes with everything you need to start as I got it from the Woolery three years ago- and in great condition. Spare pawls, warp board pegs, pick up sticks.

00y0y_5V1o09wtcxS_600x450.jpg

IMO the Harp is one of the best rigid heddles out there, has a warping board build in, and folds in half for easy storage- even with a project on it. I love this thing! Just want to pass it on to someone who will use it or learning to weave.

$225 with DC/Delaware/Philly pick-up
Shipping can be calculated and add to total.
I am also traveling from Delaware to Milwaukee soon so anywhere along the way I can bring it to you!

Thanks!
Becca00y0y_5V1o09wtcxS_600x450.jpg


FS: in WI, USA: Schacht 4 Harness Table Loom $600

$
0
0
 

Like-new condition, only ever warped once, as shown in pictures. Asking $600, located in South-Central WI, willing to meet someone within 100 miles of 53598 zip code. Willing to ship at buyers expense. Better pictures will be added if I can figure out this instagram thing…

Instagram photo

Includes:

  • 25” Schacht 4 harness hand jack table loom
  • 14’ Schacht warping board
  • 5 stick shuttles: 1-24”, 2-16”, 2-8”--unknown maker
  • 1 Schacht boat shuttle
  • 3 spare heddles
  • 1 heddle hook
  • 4 tie-on dowel rods (no clue what they’re called)

FS: HD 36/8 Loom plus Extras, Northern VA, USA

$
0
0
 

In excellent condition. Selling to make space for a larger loom and in hopes of its finding a good home.
• Harrisville Designs 8-shaft loom with 10 treadles, 36” weaving width
• 36-inch reed –10 dpi
• 800 inserted-eye heddles
• 40 original tie-up Snap Chains
• Original assembly manual
Retail: $2560, plus extras below (retail $432) = Total (retail $2992)
• $224 – 2 extra reeds – 8 and 12 dpi
• $120 – Treeditions 36” cherry raddle
• $88 – Schacht 4.5 yard warping board
Sale Price: $1800. Pick up in northern Virginia only.

IMG_20160505_1349356_rewind.jpg

IMG_20160505_1347304_rewind.jpg

IMG_20160505_1347404_rewind.jpg

FS: Weaving Yarn Destash

$
0
0
 

Hi all! I’m destashing my weaving yarns. More details can be found in my stash trade section. Hope I’m doing this right. It has been awhile since I’ve been on ravelry for more than a pattern!

Shipping included within the USA. Will ship elsewhere, but need to determine costs. Will combine and give a small discount for it! :)

Lunatic Fringe 20 Color Gamp
Lunatic Fringe 20 Color Gamp - $70.

Carpet Weight Cotton - 84
8/4 cottons - 3 colors - $7 each.

American Maid 32 Sampler
American Maid 3/2 Sampler Pack - $22.

Lunatic Fringe Yarns 32 American Maid
3/2 Unmercerized American Maid cotton - $16

Thanks so much!

ISO Book: Ursina Arn-Grischott - Doubleweave, 1999

$
0
0
 

Friends,
I am looking for an out of print book.. currently priced (used) beyond my budget

if you have a copy which you could part with, I would be honored to give it a good home.. (US, Paypal ready.. can trade for a custom weaving: tablerunner or a pile of kitchen towels)

*PER: forum guidelines.. please contact me privately*

Doubleweave on four to eight shafts : ideas for weaving double and multilayered fabrics
Author: Ursina Arn-Grischott
Publisher: Loveland, Colo. : Interweave Press, cop. 1999

image title

FS: Norwood Cherry Loom, 40 / 4 / 6 with Bench

$
0
0
 

One gorgeous cherry wood Norwood Loom, made in Fremont, MI, (Serial H4418), with original bench, 8-dent full width reed, lots and lots of heddles, sleying hook, shuttle, the original manual, and various extras.

In great working shape with recent use; it’s lovely to weave on. 4 shaft, 6 treadle, sectional 1-yard warping beam.

$1100.00

In the SF Bay Area, ideally you’ll pick up, or PM me to discuss details. Folds for easy moving or storage.

Norwood Loom and Bench

Provenance: name plate & serial

a top view

Viewing all 10867 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>