FS: Glimakra Ideal 31" loom

July 21, 2016, 6:06 am

≫ Next: FS Mighty Wolf

≪ Previous: FS: Schacht 42" 8 shaft floor weaving loom

$

0

0

 

Glimakra Ideal Countermarch Loom - 1600$

4 shafts, 6 treadles
6 dent reed
31” weaving width
Some texsolv tie ups
Texsolv heddles(or nylon)
Sectional Warping Beam parts.
Includes Bench

Functions fine. 2 wedges were missing and replaced with homemade ones. Pins for countermarch are missing.
Finish is in rough condition because of age. No noticeable water damage or warping.

Pickup or meet only.. General area Albuquerque NM. Easily fits in minivan…individual pieces are light.

Cash payment requested. Please PM for more info.

---

FS Mighty Wolf

July 21, 2016, 7:23 am

≫ Next: FS: Reeds (30" to 54")

≪ Previous: FS: Glimakra Ideal 31" loom

$

0

0

 

I have a Schacht Mighty Wolf 4 harness loom with all the bells and whistles (except the bench). It comes with every option available. It is like new.

I am in SW VA (Henry) - which is about an hour from Greensboro, Winston Salem, Roanoke, and Blacksburg, and cannot ship this item.

$1800 cash (or I can run a credit card if you pay the fees which are 2.5%.)

FS: Reeds (30" to 54")

July 21, 2016, 8:21 am

≫ Next: FS: Lacis Power 4 Ply Braider

≪ Previous: FS Mighty Wolf

$

0

0

 

• I am giving you the total reed length (from tip to tip) and the height - to make sure it will fit in your beater. The length is the total reed length not the weaving width. If you have questions about a certain reed - please do not hesitate to private message me with your questions.

• Prices do not include shipping. Please include your zip code when inquiring so I am able to give you a shipping quote.

• Please include your paypal email address so I can send you a money request

• all of the Stainless Steel reeds are in very good condition - NO RUST! The Carbon Steel reeds are in nice condition some discoloration to the metal but no rust areas.

---

46” 8 dent stainless steel reed - Height: 5” (red taped edge) - $80.00

---

40 1/8” 16 dent carbon steel reed - Height: 5” (green papered edge) - $55.00

---

45.5” 8 dent stainless steel reed - Height: 5.5” (blue taped edge) - $80.00

---

30” 3 dent carbon steel reed - Height: 5.5” (green papered edge) - $45.00

---

45 5/8” 15 dent Stainless steel reed - Height: 6” (red taped edge) - $90.00
This reed was bought for and used on a Big Harrisville Rug Loom

---

45 5/8” 12 dent stainless steel reed - Height: 6” (red taped edge) - $90.00
This reed was bought for and used on a Big Harrisville Rug Loom

---

45 5/8” 15 dent stainless steel reed - Height: 6” (red taped edge) - $90.00
This reed was bought for and used on a Big Harrisville Rug Loom

---

45 5/8” 6 dent stainless steel reed - Height: 6” (red taped edge) - $90.00
This reed was bought for and used on a Big Harrisville Rug Loom

---

45 5/8” 10 dent stainless steel reed - Height: 6” (red taped edge) $90.00
This reed was bought for and used on a Big Harrisville Rug Loom

---

54.25 8 dent stainless steel reed - Height: 6” (blue taped edge) - $95.00

---

32 7/8” 15 dent stainless steel - Height: 5” (blue taped edge) - $57.00 - sold

---

40” 6 dent stainless steel reed - Height: 5” (red taped edge) - $72.00 - SOLD

---

42.5” 8 dent stainless steel reed - Height: 5” (blue taped edge) - $75.00 - SOLD

FS: Lacis Power 4 Ply Braider

July 21, 2016, 8:39 am

≫ Next: ISO: books by Alice Schlein

≪ Previous: FS: Reeds (30" to 54")

$

0

0

 

Lacis Power 4 Ply Braider - Ply 2 or 4 braids quickly, easy to use and very fast. This is a duplicate, used once still in box. Asking $30 plus ship - contact bewove@gmail.com

Dawn

ISO: books by Alice Schlein

July 21, 2016, 1:07 pm

≫ Next: ISO: books by Margaret Coe

≪ Previous: FS: Lacis Power 4 Ply Braider

$

0

0

 

I’m looking to buy weaving books by Alice Schlein. Thanks

ISO: books by Margaret Coe

July 21, 2016, 1:09 pm

≫ Next: FS: Older wooden rug temples

≪ Previous: ISO: books by Alice Schlein

$

0

0

 

I’m looking for used weaving books by Margaret Coe. Thanks.

FS: Older wooden rug temples

July 21, 2016, 2:15 pm

≫ Next: FS: Leclerc Tension Box with Counter

≪ Previous: ISO: books by Margaret Coe

$

0

0

 

Older wooden rug temples

$30 includes 2 temples and shipping in US/48

• 26” -32” ish span

From a pet / smoke free environment

Price includes shipping in US/48. Please include your zip code when inquiring.

Please include your paypal email address so I can send you a money request

FS: Leclerc Tension Box with Counter

July 22, 2016, 11:06 am

≫ Next: ISO tiny amount of Brassard 9/2 linen

≪ Previous: FS: Older wooden rug temples

$

0

0

 

Leclerc tension box with yardage counter for sale for $95 + shipping unless you can pick up from Northern Virginia. Box is in very good condition but comes with no accompanying directions or additional parts. Counter appears to work well. Click on photo to see other images.
(/attached/raytheblinddog/59325436)

---

ISO tiny amount of Brassard 9/2 linen

July 22, 2016, 1:06 pm

≫ Next: ISO: Rigid heddle loom

≪ Previous: FS: Leclerc Tension Box with Counter

$

0

0

 

I am in need (rather quickly, like ASAP!) of about 15 yards of Brassard 9/2 linen in Cerise, Jaune, OR Limette pale. If anyone has a bit they can reel off and get in the mail to me, I would greatly appreciate it! Thank you!

ISO: Rigid heddle loom

July 22, 2016, 5:40 pm

≫ Next: FS: Tools of the Trade 32" 8 Harness 10 dent

≪ Previous: ISO tiny amount of Brassard 9/2 linen

$

0

0

 

I need a reasonably priced 24” rigid heddle loom. I’m a new weaver.

FS: Tools of the Trade 32" 8 Harness 10 dent

July 22, 2016, 6:59 pm

≫ Next: FS: Loom 22" 8 Harness Harrisville

≪ Previous: ISO: Rigid heddle loom

$

0

0

 

Solid well made Tools of the Trade table loom with a 32” weaving width. Eight (8) harnesses with inserted eye heddles, 10 dent reed and lease sticks. Harnesses go up and down smoothly, just a well made maple blond loom. $450. Washington, DC metro area, right now the loom is in Southern Maryland so pick up in the Port Republic area and can also meet in the Prince Frederick area.

Can also bring this loom to the Rockville, MD or Fairfax, VA area over the next week but would need a Paypal payment in advance. Thanks for looking. No shipping it doesn’t break down for shipment.




!

FS: Loom 22" 8 Harness Harrisville

July 22, 2016, 8:31 pm

≫ Next: FS: Schacht 8 Shaft Baby Wolf

≪ Previous: FS: Tools of the Trade 32" 8 Harness 10 dent

$

0

0

 

Harrisville folding loom $800, 22” weaving width, 8 harness, 12 dent reed plus the Harrisville tensioning device. I bought tensioning but never got to use it and still in the package. A good loom for smaller spaces and one you can pull out and work on and then fold up and push out of the way. I bought a pack of the Texsolv to see if I would like but never did get to use those either, only one harness worth of Texsolv and not for the whole loom. Pretty hard rock maple and clean.

Shuttles in the picture DO NOT come with the loom. If someone needs shuttles I have others to sell. Loom is currently in Southern , MD, but can be brought to Rockville, MD or Fairfax, VA. $800.

FS: Schacht 8 Shaft Baby Wolf

July 23, 2016, 9:17 am

≫ Next: FS: Schacht 11" Boat Shuttle - open bottom

≪ Previous: FS: Loom 22" 8 Harness Harrisville

$

0

0

 

FS 8 shaft Baby Wolf on wheels. Cones with a 10 dent reed and lease sticks

$ 1,500. Pick up in Waco Texas.

or ship at buyer’s expense. Please pm.

FS: Schacht 11" Boat Shuttle - open bottom

July 23, 2016, 12:27 pm

≫ Next: FS: 45" 4H 6T Leclerc Nilus II $600

≪ Previous: FS: Schacht 8 Shaft Baby Wolf

$

0

0

 

11” regular boat shuttle from Schacht - open bottom

includes 1 - 4” bobbin

• new these retail for: $39.00

  My price - $28.00 which includes shipping in US/48

• Please include your zip code when inquiring

• Please include your paypal email address so I can send you a money request

• From a pet / smoke free environment

FS: 45" 4H 6T Leclerc Nilus II $600

July 23, 2016, 2:13 pm

≫ Next: Leclerc Cendrel, NW Looms Lil' Sis

≪ Previous: FS: Schacht 11" Boat Shuttle - open bottom

$

0

0

 

Moving to a new home and don’t have room for all the looms.
According to the Leclerc website, the Nilus comes in 36” 45” and 60” so I guess this would be a 45, however the actual weaving with is closer to 47-48”

Loom is in very good shape, some cosmetic boo boos (former community center loom) but weaves very nicely.

Back folds up when not in use.

Comes with 12 dent reed

Local pickup in Summerville SC or buyer arranges shipping. I did take this loom almost down to sticks when I moved it to the current home, it fit in the back of a Jeep Cherokee - barely.](http://www.ravelry.com/projects/wendelene/looms)

---

Leclerc Cendrel, NW Looms Lil' Sis

July 24, 2016, 9:26 am

≫ Next: FS Heddles for 12" Ashford Knitters Loom MN

≪ Previous: FS: 45" 4H 6T Leclerc Nilus II $600

$

0

0

 

Prices include shipping in US. I invoice through Square.

$65 Northwest Looms Lil’ Sis inkle loom. Excellent condition.

$95 Leclerc Cendrel

I bought this second hand and it was missing 5 dowels and the shuttle when it arrived. There’s still plenty of room for a long warp, but not the full length advertised by leclerc.

FS Heddles for 12" Ashford Knitters Loom MN

July 24, 2016, 3:08 pm

≫ Next: FS AVL Folding Compudobby 16 Shaft

≪ Previous: Leclerc Cendrel, NW Looms Lil' Sis

$

0

0

 

For sale heddles for 12” Ashford Knitters Loom. I purchased these from another Raveler with fond expectations of building my own loom. I have too many other projects and figured out another loom. I have 1 each of 2.5, 5, 7.5 , and 10 DPI. $25 each including shipping in the US or $95 for all 4 including shipping. Cross posted in Rigid Heddle Weavers

FS AVL Folding Compudobby 16 Shaft

July 25, 2016, 8:11 am

≫ Next: FS: Leese Sticks

≪ Previous: FS Heddles for 12" Ashford Knitters Loom MN

$

0

0

 

AVL Compudobby II, 40 inch folding loom, 16 shafts, lots of texsolv heddles. adjustable bench, 2 new reeds, Sectional beam, plain beam, new style auto pick advance, auto cloth storage, sectional rails, raddle. Works beautifully, folds for small footprint.

Asking $4600 - located Charlotte NC

bewove@gmail.com

FS: Leese Sticks

July 25, 2016, 3:57 pm

≫ Next: FS: Lovely Handcrafted ( in Ohio!) 30" X-frame loom -$350

≪ Previous: FS AVL Folding Compudobby 16 Shaft

$

0

0

 

18” Leese Sticks
19.5” Leese Sticks
14’5” Leese Sticks
28” Leese Sticks
(yard stick not included)

$35.00 (for the 4 sets) which includes shipping in US/48

• From a smoke / pet free home

• Price includes shipping in US/48

• Please include your zip code and paypal email address when inquiring so I can send you a paypal money request.

FS: Lovely Handcrafted ( in Ohio!) 30" X-frame loom -$350

July 25, 2016, 7:23 pm

≫ Next: FS: Misc. AVL Loom Parts

≪ Previous: FS: Leese Sticks

$

0

0

 

For sale is this easy to use 4 harness direct tie-up loom beautifully handcrafted by C.H. McCoplgan of Cuyahoga Falls Ohio! I hope the pictures show it all!

This loom has some charming features such as the handle on the beater and the nicely bent cloth beam crank handle. The treadles are so large and smooth! The wood is so pretty- I think it is cherry. In a post about my other loom by this maker Joanne formerly of Glimakra USA said that the great way in which the shafts lift is the same system that the Dorset looms use. Mr McColgan also understood the loom mechanics and I love the way the shafts are stepped down from front to back- I included that picture. The loom has a terrific and large shed and the lower threads sit perfectly on the shuttle race. Breast beam height is 29 1/8” making a regular kitchen chair a perfect fit for me.

The loom has some unique features as well. There is no back beam crank- you stand behind the loom and roll the beam with your hands making it easier to have a warping pal around! Or a trapeze I guess! This has the brake release on the left side and it is a hand brake-pull the cord with your left hand and wind the cloth beam crank with your right hand.

I replaced 2 springs which had sprung. I replaced the brake cord with some black para-cord that we had around rather than clothesline. I don’t think they make clothes line like they used too! Or maybe this was some other type of cord. I did not clean the heddle bars or the reed. Both could use a treatment! I did not re-tie the tie on bars and they could use it. And when I was buying the springs I forgot to buy the new carriage boys for the beater top piece but will get those tomorrow.

This loom has a weaving width of 30” and is about 40” from outside bolt to outside bolt. Front to back it measures 36” when open and about 19 1/2” when folded.

And now for the Beauty shots!

Hoping someone here will love this sweet loom and help me continue in my effort to become a less is more kinda girl! I may be starting to get in the groove!

Asking $350 and hoping you would come to Erie PA to pick up! I may be able to arrange a meet up in the Pittsburgh, Cleveland or Buffalo areas.